14/12/00 db91046m-aas/a1 optically coupled bilateral switch non-zero crossing triac IS6003, is6005, is6010, is6015, is6030 approvals l ul recognised, file no. e91231 'x' specification approvals l l vde 0884 pending description the is600_ series are optically coupled isolators consisting of a gallium arsenide infrared emitting diode coupled with a light activated silicon bilateral switch performing the functions of a triac mounted in a standard 6 pin dual-in-line package. feature l options :- 10mm lead spread - add g after part no. surface mount - add sm after part no. tape&reel - add smt&r after part no. l high isolation voltage (5.3kv rms ,7.5kv pk ) l 600v peak blocking voltage l all electrical parameters 100% tested l custom electrical selections available applications l crts l power triac driver l motors l consumer appliances l printers absolute maximum ratings (25 c unless otherwise noted) storage temperature -40 0 c - +100 0 c operating temperature -40 0 c - +85 0 c lead soldering temperature 260 0 c (1.6mm from case for 10 seconds) input-to-output isolation voltage (pk) 7500 vac (60 hz , 1sec. duration) input diode forward current 60ma reverse voltage 3v power dissipation 100mw (derate linearly 1.33mw/ 0 c above 25 0 c) output photo triac off-state output terminal voltage 600v rms forward current 100ma forward current (peak) 1.2a power dissipation 300mw (derate linearly 4.0mw/ 0 c above 25 0 c) power dissipation total power dissipation 330mw (derate linearly 4.4mw/ 0 c above 25 0 c) isocom inc 1024 s. greenville ave, suite 240, allen, tx 75002 usa tel: (214) 495-0755 fax: (214) 495-0901 e-mail info@isocom.com http://www.isocom.com isocom components ltd unit 25b, park view road west, park view industrial estate, brenda road hartlepool, ts25 1yd england tel: (01429)863609 fax : (01429) 863581 e-mail sales@isocom.co.uk http://www.isocom.com option g 7.62 surface mount option sm 10.16 0.26 10.46 9.86 0.6 0.1 1.25 0.75 1 3 6 2 5 4 0.26 0.5 dimensions in mm 7.0 6.0 1.2 7.62 3.0 13 max 3.35 4.0 3.0 2.54 7.62 6.62 0.5
db91046m-aas/a1 14/12/00 parameter min typ max units test condition electrical characteristics ( t a = 25c unless otherwise noted ) input forward voltage (v f ) 1.2 1.5 v i f = 10ma reverse current (i r ) 100 m a v r = 3v output peak off-state current ( i drm ) 100 na v drm = 600v (note 1 ) peak blocking voltage ( v drm ) 600 v i drm = 100na on-state voltage ( v tm ) 1.5 3.0 v i tm = 100ma ( peak ) critical rate of rise of off-state voltage ( dv/dt ) ( note 1 ) 10 v/ m s critical rate of rise of commutating voltage ( dv/dt ) ( note 1 ) 0.1 0.2 v/ m s i load = 15ma, v in = 30v ( fig 1. ) coupled input current to trigger ( i ft )(note 2 ) IS6003 3 ma v d = 3v ( note 2 ) is6005 5 ma is6010 10 ma is6015 15 ma is6030 30 ma holding current , either direction ( i h ) 100 m a input to output isolation voltage v iso 5300 v rms see note 3 7500 v pk see note 3 note 1. test voltage must be applied within dv/dt rating. note 2. guaranteed to trigger at an i f value less than or equal to max. i ft , recommended i f lies between rated i ft and absolute max. i ft . note 3. measured with input leads shorted together and output leads shorted together. r in 1 3 6 5 4 v cc + - 2k w v in ~ static dv/dt commutating dv/dt 2 +5v v cc 0v 120 w figure 1 r l
db91046m-aas/a1 14/12/00 0.05 -30 0 25 50 75 100 125 ambient temperature t a ( c ) 0 rms on-state current i t (arms) rms on-state current vs. ambient temperature -30 0 25 50 75 100 ambient temperature t a ( c ) normalised input trigger current ( i ft ) normalised input trigger current vs. ambient temperature 0.1 0 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 normalised repetitive peak off-state voltage vs. ambient temperature normalised repetitive peak off-state voltage -30 0 25 50 75 100 ambient temperature t a ( c ) 0.2 0.4 0.6 0.8 1.0 1.2 1.4 0 on-state voltage vs. ambient temperature on-state voltage v tm (v) -30 0 25 50 75 100 ambient temperature t a ( c ) 0.4 0.8 1.2 1.6 2.0 2.4 2.8 normalised to t a = 25c 0 on-state current vs. on-state voltage on-state current i tm (ma) 0 0.4 0.8 1.2 1.6 2.0 on-state voltage v tm (v) 80 60 40 20 100 normalised to t a = 25c i f = 20ma t a = 25c ambient temperature t a ( c ) 60 30 20 10 0 40 50 -30 0 25 50 75 100 125 forward current vs. ambient temperature forward current i f (ma) 70 80
|
